Skip to main content

Backrest

Describes signals related to the backrest of the seat.

type Backrest {
  bottomLumbarSupport(
    unit: RelationUnitEnum = PERCENT
  ): Float
  heatingCooling(
    unit: RelationUnitEnum = PERCENT
  ): Int8
  isLessLumbarSupportSwitchEngaged: Boolean
  isLessSideBolsterSupportSwitchEngaged: Boolean
  isLumbarDownSwitchEngaged: Boolean
  isLumbarUpSwitchEngaged: Boolean
  isMoreLumbarSupportSwitchEngaged: Boolean
  isMoreSideBolsterSupportSwitchEngaged: Boolean
  isReclineBackwardSwitchEngaged: Boolean
  isReclineForwardSwitchEngaged: Boolean
  lumbarHeight(
    unit: LengthUnitEnum = MILLIMETER
  ): UInt8
  lumbarSupport(
    unit: RelationUnitEnum = PERCENT
  ): Float
  midLumbarSupport(
    unit: RelationUnitEnum = PERCENT
  ): Float
  recline(
    unit: AngleUnitEnum = DEGREE
  ): Float
  sideBolsterSupport(
    unit: RelationUnitEnum = PERCENT
  ): Float
  sideBolsterSupportLeft(
    unit: RelationUnitEnum = PERCENT
  ): Float
  sideBolsterSupportRight(
    unit: RelationUnitEnum = PERCENT
  ): Float
  topLumbarSupport(
    unit: RelationUnitEnum = PERCENT
  ): Float
  upperShoulderSupport(
    unit: RelationUnitEnum = PERCENT
  ): Float
}

Fields​

Backrest.bottomLumbarSupport ● Float scalar​

Bottom lumbar support (in/out position). 0 = Innermost position. 100 = Outermost position.

Backrest.bottomLumbarSupport.unit ● RelationUnitEnum enum​

Backrest.heatingCooling ● Int8 scalar​

Heating or Cooling requsted for the Item. -100 = Maximum cooling, 0 = Heating/cooling deactivated, 100 = Maximum heating.

Backrest.heatingCooling.unit ● RelationUnitEnum enum​

Backrest.isLessLumbarSupportSwitchEngaged ● Boolean scalar​

Is switch for less lumbar support engaged.

Backrest.isLessSideBolsterSupportSwitchEngaged ● Boolean scalar​

Is switch for less side bolster support engaged.

Backrest.isLumbarDownSwitchEngaged ● Boolean scalar​

Lumbar down switch engaged.

Backrest.isLumbarUpSwitchEngaged ● Boolean scalar​

Lumbar up switch engaged.

Backrest.isMoreLumbarSupportSwitchEngaged ● Boolean scalar​

Is switch for more lumbar support engaged.

Backrest.isMoreSideBolsterSupportSwitchEngaged ● Boolean scalar​

Is switch for more side bolster support engaged.

Backrest.isReclineBackwardSwitchEngaged ● Boolean scalar​

Backrest recline backward switch engaged.

Backrest.isReclineForwardSwitchEngaged ● Boolean scalar​

Backrest recline forward switch engaged.

Backrest.lumbarHeight ● UInt8 scalar​

Height of lumbar support. Position is relative within available movable range of the lumbar support. 0 = Lowermost position supported.

Backrest.lumbarHeight.unit ● LengthUnitEnum enum​

Backrest.lumbarSupport ● Float scalar​

Lumbar support (in/out position). 0 = Innermost position. 100 = Outermost position.

Backrest.lumbarSupport.unit ● RelationUnitEnum enum​

Backrest.midLumbarSupport ● Float scalar​

Mid lumbar support (in/out position). 0 = Innermost position. 100 = Outermost position.

Backrest.midLumbarSupport.unit ● RelationUnitEnum enum​

Backrest.recline ● Float scalar​

Backrest recline compared to seat z-axis (seat vertical axis). 0 degrees = Upright/Vertical backrest. Negative degrees for forward recline. Positive degrees for backward recline.

Backrest.recline.unit ● AngleUnitEnum enum​

Backrest.sideBolsterSupport ● Float scalar​

Side bolster support. 0 = Minimum support (widest side bolster setting). 100 = Maximum support.

Backrest.sideBolsterSupport.unit ● RelationUnitEnum enum​

Backrest.sideBolsterSupportLeft ● Float scalar​

Side bolster support left. 0 = Minimum support (widest side bolster setting). 100 = Maximum support.

Backrest.sideBolsterSupportLeft.unit ● RelationUnitEnum enum​

Backrest.sideBolsterSupportRight ● Float scalar​

Side bolster support right. 0 = Minimum support (widest side bolster setting). 100 = Maximum support.

Backrest.sideBolsterSupportRight.unit ● RelationUnitEnum enum​

Backrest.topLumbarSupport ● Float scalar​

Top lumbar support (in/out position). 0 = Innermost position. 100 = Outermost position.

Backrest.topLumbarSupport.unit ● RelationUnitEnum enum​

Backrest.upperShoulderSupport ● Float scalar​

Upper shoulder support. 0 = Minimum support (widest side bolster setting). 100 = Maximum support.

Backrest.upperShoulderSupport.unit ● RelationUnitEnum enum​

Member Of​

Seat object